verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-30S

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-30S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 55 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke55 mm
  • Adjustable range25–55 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$59.98 $67.48Save 11% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-30S

The AirTAC SDAJ40X55-30S is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. An external M12x1.25 adjuster screw lets you dial the outward stroke anywhere between 25 and 55 mm without changing parts.

This riveted-body design saves valuable axial mounting depth where longer profile cylinders cannot fit. The unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic solid-state switches. End-of-travel shock is managed by a fixed NBR bumper, which decelerates the piston but is not an adjustable air cushion.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-30S Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-30S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke55 mm
Adjustable range25 – 55 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-30S

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×55Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-30S Is Used

precision_manufacturing

Changeover-Heavy Machining

Dial the extend stop from 25 to 55 mm on the fly to accommodate different part lengths on a machining line without swapping out the entire actuator assembly.

science

Trial Positioning Jigs

Use the M12x1.25 screw to fine-tune the extend endpoint during R&D testing, finding the exact 25-55 mm reach before locking down a final mechanical setup.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-30S the Right Cylinder?

Choose this unit if your fixture requires frequent changeovers or trial positioning within the 25-55 mm window.

Confirm your required extend length, the PT1/8 port, and the Ø16 mm rod with its female M8x1.25 end thread. The -S code ensures switch readiness. Remember that a plain cylinder does not hold position if air pressure drops or the valve centers; for load holding without live pressure, install an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 25–55 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-30S FAQ

The theoretical maximum push is 128 kgf at 1.0 MPa.

The external M12x1.25 screw shortens the extend endpoint by up to 30 mm, giving a usable 25-55 mm range while retract remains full. The built-in -S magnet allows you to track position using AirTAC reed or electronic solid-state switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-30S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X55-30S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.