verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-40

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-40 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 15 to 55 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke55 mm
  • Adjustable range15–55 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$52.80 $60.30Save 12% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-40

The AirTAC SDAJ40X55-40 is a compact double-acting double-rod cylinder engineered for on-site extend positioning. A built-in M12x1.25 adjuster screw lets you dial the outward stop anywhere between 15 and 55 mm, eliminating the need for shims or part swaps during changeovers.

This riveted-body design minimizes axial footprint, fitting easily where longer profile cylinders cannot. End-of-travel shock is managed by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; adding an -S variant enables sensing.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-40 Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-40
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke55 mm
Adjustable range15 – 55 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-40

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×55Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-40 Is Used

straighten

Adjustable Press Fit

Dial the 15-55 mm extend stop to set precise insertion depths for varying pin lengths during short-run press assemblies.

sync_alt

Changeover Dials

Rotate the M12x1.25 screw to instantly reposition the 628.3 N stroke endpoint when switching product formats on a packaging line.

view_module

Trial Positioning

Fine-tune the outward reach on the machine to find the exact 32 kg vertical lift point before locking down tooling.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-40 the Right Cylinder?

Stepping down to SDAJ32 yields 402.1 N, whereas stepping up to SDAJ50 provides 981.7 N.

Choose this model if your fixture requires frequent trial positioning or rapid format changes. Verify your setup needs a 15-55 mm extend window, PT1/8 porting, and a female M8x1.25 rod end. Remember that a standard cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end and does not lock the load. For secure holding without live pressure, integrate an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 15–55 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-40 FAQ

The theoretical maximum push is 128 kgf at 1.0 MPa.

Turning the external M12x1.25 screw mechanically shortens the extend stroke by up to 40 mm, giving a usable range of 15 to 55 mm. It sets the physical stop position without altering pneumatic force, and it does not lock the piston mid-stroke.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X55-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.