
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-75S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X55-75S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M12x1.25) screw, you can dial the extend position anywhere from 0 to 55 mm directly on the machine without shims or part changes. Retract remains full length, while the push force stays identical to a standard SDA of this bore, delivering about 628.3 N at 0.5 MPa.
This thin riveted-body design saves axial mounting depth where round-body or profile cylinders will not fit. The bore-fixed PT1/8 port and 16 mm rod keep the footprint minimal. End shock is handled by a fixed NBR bumper that decelerates the stroke, and the built-in -S magnet enables position sensing with AirTAC reed or electronic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-75S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 55 mm |
| Adjustable range | 0 – 55 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the stroke on-site to fold different carton widths without changing parts, relying on the fixed NBR bumper to absorb end shocks.
Set precise lifting heights up to 55 mm for 32 kg loads, using the M12x1.25 adjuster screw to fine-tune elevation safely.
Choose it when your fixture requires on-site stroke tuning within the 0-55 mm extend window.
Confirm the 40 mm bore, 55 mm stroke, 75 mm window, PT1/8 port, female rod thread, and the -S magnet. Note that a plain cylinder does not hold its load on air loss or valve centring; the fixed NBR bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
At 0.5 MPa, the push force is 628.3 N and the pull force is 527.8 N. At 0.7 MPa, push is 879.6 N and pull is 738.9 N. The theoretical maximum push is 128 kgf at 1.0 MPa.
The M12x1.25 R screw shortens the extend stop by up to 75 mm, allowing a usable extend range of 0-55 mm without altering force. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.