
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-10B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 50 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X60-10B is a double-acting compact cylinder featuring an external adjustable extend stop. Turning the M12x1.25 adjuster screw lets you dial the outward stroke on the machine between 50 and 60 mm, eliminating the need for shims or part swaps during commissioning.
This variant features a male M14x1.5 piston rod thread and a short riveted body that conserves axial mounting depth in tight machinery envelopes. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S option.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 60 mm |
| Adjustable range | 50 – 60 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 50-60 mm extend reach for stamping or forming tools during initial setup, using the M12x1.25 screw to fine-tune contact without machining spacers.
Set temporary mechanical endpoints for prototype testing fixtures, safely decelerating the 16 mm rod at the extend limit via the fixed NBR bumper.
Choose this model when setups require frequent on-site stroke tuning to perfect tooling positions.
Verify your installation parameters: 40 mm bore, 60 mm maximum stroke, 10 mm adjustment window, PT1/8 port, and a male M14x1.5 rod thread. Keep in mind that a plain cylinder does not hold its load if air pressure drops or the valve is centered—the piston will drift and the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
The adjustment screw does not alter these force figures.
The external M12x1.25 screw acts as a mechanical stop, allowing you to shorten the extend stroke from the 60 mm maximum down to 50 mm on-site. It sets the end position and does not function as a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.