
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-10SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 50 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X60-10SB is a compact double-acting double-rod cylinder featuring an on-site extend stop. An external M12x1.25 adjuster screw lets you dial the outward stroke anywhere between 50 and 60 mm, eliminating the need for shims or part swaps during commissioning.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M14x1.5 piston rod end. The short riveted body saves axial mounting depth where space is tight. End shock is handled by a fixed NBR bumper, which decelerates the piston near the end of travel but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 60 mm |
| Adjustable range | 50 – 60 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly reset the outward stroke on packaging lines when switching product widths, using the 10 mm window to avoid part changes.
Set a precise lower dead center for light pressing tasks, relying on the fixed NBR bumper to absorb the end shock at the adjusted stop.
Choose this 40 mm bore if your setup requires on-site stroke tuning to hit an exact position.
Confirm the 40 mm bore, 60 mm maximum stroke, 10 mm adjust window, and PT1/8 port. This specific SKU includes the -S magnet for sensing and the -B male M14x1.5 rod thread. Remember that a plain cylinder does not hold its load on air loss or valve centring; the piston drifts. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
The built-in -S magnet enables position sensing with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.