
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-20 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 40 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X60-20 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M12x1.25 adjuster screw lets you dial the extend stroke down from 60 mm to 40 mm directly on your machine, eliminating shims or part swaps.
Built with a short riveted body, this unit saves axial mounting depth where round-body or profile cylinders cannot fit. It uses a 16 mm piston rod and a PT1/8 port. End shock is handled by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 60 mm |
| Adjustable range | 40 – 60 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 60 mm down to 40 mm to clamp raw castings of varying widths without swapping fixture hardware.
Set the mechanical stop to limit a 32 kg vertical lift safely, using the fixed NBR bumper to decelerate the payload near the end of travel.
Choose this model if your fixture requires on-site stroke tuning between 40 and 60 mm.
Confirm your parameters: 40 mm bore, 60 mm max stroke, 20 mm adjust window, PT1/8 port, female rod-end thread M8x1.25, and no magnet. For vertical loads, remember a plain cylinder drifts on air loss—the fixed bumper only decelerates near the end and is never a lock. To hold position without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
The M12x1.25 R screw mechanically shortens the extend end-position from 60 mm down to 40 mm without changing the force. This specific SKU has no piston magnet and cannot take a switch; you must select the -S variant to use reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.