
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-20B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 40 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X60-20B is a double-acting compact cylinder featuring a male-thread M14x1.5 piston rod and an external R (M12x1.25) adjuster screw. Turning this screw lets you dial the extend stop down by 20 mm, yielding a usable extension range of 40 to 60 mm directly on the machine.
Its short riveted body conserves axial mounting depth where a larger profile cylinder will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 60 mm |
| Adjustable range | 40 – 60 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 40 to 60 mm extend stop to seat parts of varying thicknesses against a machining fixture without swapping out the entire actuator.
Choose this model if your fixture requires on-site stroke tuning during changeovers.
Confirm the 40 mm bore, 60 mm maximum stroke, 20 mm adjustment window, and PT1/8 air port suit your manifold. This SKU includes the -B option for a male M14x1.5 rod end and has no magnet. Remember that a plain cylinder drifts when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel and does not lock the load. For vertical holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
At 0.5 MPa, push force is 628.3 N and pull is 527.8 N. At 0.7 MPa, push is 879.6 N and pull is 738.9 N. The theoretical maximum push is 128 kgf at 1.0 MPa. Operating pressure spans 0.15 to 1.0 MPa, with a proof pressure of 1.5 MPa and a speed range of 30 to 500 mm/s.
The R (M12x1.25) screw mechanically shortens the extend stroke by up to 20 mm, giving a 40 to 60 mm range. It sets the end stop without changing the output force. It is not a mid-stroke lock; the cylinder drifts on air loss, so use an external rod lock for load holding. This SKU lacks a magnet, so add an -S variant for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.