
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-20S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 40 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X60-20S is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjustment screw that dials the extend stop directly on your machine. You can tune the outward stroke anywhere between 40 and 60 mm without swapping shims or parts.
Its short riveted body drastically cuts axial mounting depth where larger profile or round-body units will not fit. The unit relies on a fixed NBR bumper at each end to decelerate the stroke, meaning it is not an adjustable air cushion. Equipped with a built-in piston magnet, this variant supports AirTAC reed or electronic solid-state switches for precise position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 60 mm |
| Adjustable range | 40 – 60 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Perfect for packaging lines needing rapid format changes, letting technicians dial the extend stop from 40 to 60 mm on the fly to accommodate different carton depths.
Ideal for assembly stations testing probe depths, where the M12x1.25 screw provides exact mechanical stops during short-stroke setups without replacing components.
When sizing this 40 mm bore, look at both adjacent options. Operators who require frequent changeovers or trial positioning will benefit from the 20 mm on-site adjustment window.
Confirm the bore, 60 mm maximum stroke, 20 mm window, and PT1/8 port. This configuration includes the S magnet for sensing and a female M8x1.25 rod-end thread. Note that a plain cylinder does not hold its load on air loss or when the valve is centered; the piston drifts and the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The external M12x1.25 screw shortens the extend end position by up to 20 mm, giving a usable range of 40 to 60 mm; retract remains full. The included S magnet works with AirTAC reed or electronic switches, but the screw acts only as a mechanical stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.