
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-20SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 40 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X60-20SB is a compact double-acting cylinder featuring an on-site adjustable extend stop. By turning the external M12x1.25 adjuster screw, you can dial the forward stroke down from its 60 mm maximum to 40 mm, giving you a 20 mm tuning window without swapping shims or parts.
This variant includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches, along with a male M14x1.5 threaded rod end (-B) for secure mechanical attachments. The short riveted body minimizes axial footprint, while a fixed NBR bumper decelerates the piston at the stroke ends. Operating speed ranges from 30 to 500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 60 mm |
| Adjustable range | 40 – 60 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 40-60 mm extend stop during fixture swaps to accommodate varying part heights without machining new spacers.
Adjust the mechanical stop on the fly to set exact vertical pressing depths for multi-tier palletizing routines.
Choose this specific model if your fixture requires exact forward positioning that must be dialed in during machine commissioning or product changeovers.
Confirm your requirements for the 40 mm bore, 60 mm maximum stroke, 20 mm adjustment window, and PT1/8 air port. This unit includes the -S magnet for sensing and the -B male M14x1.5 rod thread. Note that a plain cylinder does not hold position if air pressure drops or the valve centers; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The M12x1.25 screw mechanically shortens the extend stroke from 60 mm down to 40 mm without altering force. The included -S magnet allows tracking of piston position via AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.