
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-30B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X60-30B is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. An external M12x1.25 adjuster screw lets you dial the outward stroke anywhere between 30 and 60 mm, eliminating the need for shims or part swaps during machine commissioning.
This variant utilizes a male M14x1.5 piston rod thread and a PT1/8 air port. The short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet and therefore cannot support position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 60 mm |
| Adjustable range | 30 – 60 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 30 to 60 mm insertion depth for pressing bearings on a machining line, using the mechanical stop to guarantee consistent force without reprogramming the motion controller.
Set precise upper travel limits for a 32 kg vertical lifting jig, taking advantage of the male M14x1.5 rod for robust load attachment while relying on external check valves for holding.
Choose this specific model if your fixture requires on-site stroke tuning to perfect a gripping or pressing position.
Confirm the bore size, 60 mm maximum stroke, 30 mm adjustment window, and PT1/8 port match your pneumatic layout. This SKU includes the -B option, meaning it has a male M14x1.5 rod end instead of the default female thread. Because it lacks the -S magnet, it cannot accept AirTAC reed or electronic switches. Finally, a plain cylinder does not hold a load if air pressure drops or the valve centers; for vertical load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push force is 128 kgf at 1.0 MPa.
Turning the external M12x1.25 adjuster screw shortens the extend stroke by up to 30 mm, giving a usable range of 30 to 60 mm. This SKU does not have a piston magnet, so it cannot accept reed or electronic switches; you would need the -S variant for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.