
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-30S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X60-30S is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. An external M12x1.25 adjuster screw lets you dial the outward stroke anywhere between 30 and 60 mm without changing parts.
The short riveted body minimizes axial mounting depth where longer profile or round-body units fail to fit. End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion. Equipped with a built-in piston magnet, this unit supports AirTAC reed or electronic solid-state switches for precise position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 60 mm |
| Adjustable range | 30 – 60 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the outward reach on the fly for varying box heights without swapping actuators, relying on the fixed NBR bumper to absorb the stop impact.
Set precise upper travel limits for lifts moving loads near 32 kg, utilizing the M12x1.25 adjuster to prevent overshoot in tight vertical spaces.
When sizing this 40 mm bore actuator, evaluate both neighboring options. Choose this specific model when your fixture requires frequent on-machine stroke tuning during setup or changeovers.
Verify your requirements against these specs: 40 mm bore, 60 mm max stroke, 30 mm adjustment window, PT1/8 port, and a female M8x1.25 rod-end thread. The included -S magnet enables switch sensing, while the male M14x1.5 thread is an alternative if specified. Remember that a plain cylinder does not hold position on air loss or valve centering; the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The M12x1.25 screw shortens the extend endpoint by up to 30 mm, yielding a usable 30 to 60 mm range without altering thrust. The built-in -S magnet pairs with AirTAC reed or electronic switches for position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.