
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-30SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X60-30SB is a compact double-acting double-rod cylinder engineered for on-site extend-position tuning. A built-in piston magnet enables position sensing, while the male M14x1.5 piston rod thread accommodates external mounting fixtures. The short riveted body conserves axial mounting depth where a standard round-body or profile cylinder will not fit.
Turning the external M12x1.25 R adjuster screw shortens the extend end-position within the 30 to 60 mm window without requiring shims or part changes. A fixed NBR bumper decelerates the stroke end, but note this component is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 60 mm |
| Adjustable range | 30 – 60 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 30 to 60 mm extend stop during initial commissioning to perfectly strike a part ejector without machining custom spacers.
Use the magnetic piston feedback to verify intermediate reach during prototype assembly, finding the optimal stopping point before final lockout.
When sizing this 40 mm bore, evaluate both neighbours with real 0.5 MPa push figures: stepping down to an SDAJ32 yields 402.1 N, whereas stepping up to an SDAJ50 provides 981.7 N. Choose this specific model when your fixture requires iterative extend-position tuning during initial commissioning or frequent product changeovers.
Confirm the 40 mm bore, 60 mm maximum stroke, 30 mm adjustment window, PT1/8 port, built-in magnet (S), and male M14x1.5 rod thread (B) match your envelope. Remember that a plain compact cylinder does not hold a load if air pressure drops or the valve centres; the piston drifts. For suspended or vertical loads that must remain fixed without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and the speed range is 30-500 mm/s.
The external M12x1.25 R screw mechanically limits the extend stroke, allowing you to set the end-position anywhere between 30 and 60 mm. The built-in magnet (-S) works with AirTAC reed or electronic switches for end-of-stroke sensing. The screw acts only as a mechanical stop and does not lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.