
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-40S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X60-40S is a compact double-acting double-rod cylinder featuring an on-machine extend stop. A side-mounted M12x1.25 adjuster screw lets you dial the outward stroke anywhere between 20 and 60 mm without swapping shims or parts.
Its short riveted body minimizes axial mounting depth where round-body or larger profile units will not fit. End-of-travel impact is absorbed by a fixed NBR bumper, which decelerates the piston but is not an adjustable air cushion. The included -S piston magnet supports position sensing using AirTAC reed or electronic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 60 mm |
| Adjustable range | 20 – 60 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 20 to 60 mm to perfectly set the pusher depth for varying part widths without machining new spacers.
Adjust the mechanical end stop on-site to accommodate different flap heights, relying on the fixed NBR bumper to absorb the end shock.
Operators needing frequent changeover or trial positioning will benefit from the 20-60 mm external stop. Note that a plain cylinder does not hold position on air loss; for load holding without live pressure, install an external rod lock or pilot-operated check valve. Confirm your 40 mm bore, 60 mm max stroke, 40 mm window, PT1/8 port, built-in magnet, and female M8x1.25 rod thread.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
The M12x1.25 screw shortens the extend stop up to 40 mm, yielding a usable 20-60 mm range. The -S suffix indicates a built-in piston magnet compatible with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.