verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-40SB

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-40SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 60 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke60 mm
  • Adjustable range20–60 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$62.31 $69.81Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-40SB

The AirTAC SDAJ40X60-40SB is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. A male M14x1.5 threaded piston rod and an integrated magnet for reed or electronic switches equip this unit for demanding fixture setups. By turning the external R (M12x1.25) adjuster screw, you dial the forward end-position anywhere between 20 and 60 mm without swapping shims or components.

The short riveted body drastically saves axial mounting depth where a longer cylinder would fail to fit. End-of-travel shock is managed solely by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-40SB Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-40SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke60 mm
Adjustable range20 – 60 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-40SB

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×60Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-40SB Is Used

precision_manufacturing

Format Changeover Jigs

Dial the extend stroke from 20 to 60 mm directly on the machine to accommodate different part widths without fabricating new spacer blocks.

view_module

Multi-Height Pallet Stops

Fine-tune the male M14x1.5 rod endpoint during setup to gate pallets of varying heights, locking the position mechanically for the run.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-40SB the Right Cylinder?

Choose this specific variant when your fixture requires a male M14x1.5 rod end, a PT1/8 port, and the -S magnet for position sensing.

Operators who frequently handle format changeovers or trial positioning will benefit from the 40 mm adjustment window. Note that a plain actuator cannot hold a load if air pressure drops or the valve centers; the piston will drift. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve, as the fixed bumper only decelerates near the end of travel and the R screw acts purely as a mechanical stop.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 20–60 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-40SB FAQ

The theoretical maximum push force is 128 kgf at 1.0 MPa.

The R (M12x1.25) screw shortens the extend stroke by up to 40 mm, yielding a usable 20 to 60 mm forward range while retract remains full. The included -S magnet works with AirTAC reed or electronic switches for end-position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-40SB

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X60-40SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.