
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-50B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X60-50B is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. A front R (M12x1.25) screw lets you dial the outward stroke anywhere between 10 and 60 mm, eliminating the need for shims or part swaps during machine commissioning.
This variant uses a male-threaded M14x1.5 piston rod end to secure your tooling. The short riveted body saves valuable axial mounting depth where a larger profile cylinder cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 60 mm |
| Adjustable range | 10 – 60 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Reposition the extend stop via the M12x1.25 screw to deflect different package sizes on a packaging line, saving axial space with the compact riveted body.
Stepping down, the SDAJ32 provides 402.1 N, which may be insufficient for heavier tooling; stepping up, the SDAJ50 yields 981.7 N for high-mass payloads.
This model is ideal for setups requiring frequent changeover or trial positioning, as the M12x1.25 adjuster screw allows rapid extension tuning. Remember that a plain cylinder does not hold its load if air pressure drops or the valve centers—the piston will drift, and the fixed NBR bumper only decelerates near the stroke end. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. Confirm your requirements for the PT1/8 port, 50 mm adjustment window, male M14x1.5 rod, and the absence of a magnet.
Quick checklist
Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
Turning the external R (M12x1.25) screw mechanically shortens the extend stroke by up to 50 mm, allowing usable extensions from 10 to 60 mm; retract remains full. This SKU has no piston magnet, so magnetic switches cannot be used—the -S variant is required for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.