verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-50S

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-50S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 60 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke60 mm
  • Adjustable range10–60 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$62.31 $69.81Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-50S

The AirTAC SDAJ40X60-50S is a double-acting compact cylinder featuring an external M12x1.25 adjuster screw that dials the extend stop directly on your machine. You can set the outward travel anywhere from 10 to 60 mm without swapping parts or adding shims, making it ideal for trial positioning.

Its short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. The unit includes a fixed NBR bumper at each end to decelerate the stroke, though it is not an adjustable air cushion. Equipped with a built-in piston magnet, this version supports AirTAC reed or electronic switches for precise end-of-stroke detection.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-50S Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-50S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke60 mm
Adjustable range10 – 60 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-50S

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×60Maximum stroke length in mm.
-50Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-50S Is Used

straighten

Adjustable Press Fit

Dial the extend stop from 10 to 60 mm to test multiple insertion depths on a 628.3 N press without machining new spacers.

sync_alt

Rapid Changeover Lines

Switch product families quickly by turning the M12x1.25 screw to reposition the endpoint, saving axial depth in tight cells.

science

Trial Positioning Rig

Use the 50 mm window to find the exact clamping distance for a 32 kg vertical lift payload before locking the final setting.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-50S the Right Cylinder?

Choose the 50 mm adjustable window if your setup requires extensive changeover or fine-tuning across the 10 to 60 mm range.

Confirm your requirements for the PT1/8 port, 16 mm rod, and female M8x1.25 rod-end thread. The included magnet enables solid-state or reed sensing. Remember that a plain cylinder does not hold position if air pressure drops or the valve centres; for load holding without live pressure, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 10–60 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-50S FAQ

The theoretical maximum push is 128 kgf at 1.0 MPa.

The external M12x1.25 screw shortens the extend stroke by up to 50 mm, giving a usable range of 10 to 60 mm. The built-in magnet works with AirTAC reed or electronic switches for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-50S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X60-50S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.