
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-50SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X60-50SB is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjustment screw. Turning this R-thread mechanism lets you dial the extend end-position anywhere between 10 and 60 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract travel remains full length.
The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. This unit includes a built-in piston magnet for AirTAC reed or electronic switches and a male M14x1.5 piston rod end. End shock is managed by a fixed NBR bumper, not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-50SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 60 mm |
| Adjustable range | 10 – 60 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 10 to 60 mm via the M12x1.25 screw to machine multiple material thicknesses on a single fixture without changing out the cylinder body.
When sizing this 40 mm bore, evaluate both neighboring options against your exact thrust requirements.
This specific configuration is ideal for operators needing frequent on-site stroke tuning to accommodate varying material thicknesses. It carries the -S magnet code for position sensing and the -B code for a male M14x1.5 rod thread. Remember that a plain cylinder does not hold its load upon air loss or valve centering; the piston drifts and the fixed bumper only decelerates near the stroke end. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The R (M12x1.25) screw shortens the extend stroke by up to 50 mm, yielding a usable 10 to 60 mm range; it acts as a mechanical stop, not a mid-stroke lock. The -S code denotes a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.