verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-75S

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-75S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 60 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke60 mm
  • Adjustable range0–60 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$62.31 $69.81Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-75S

The AirTAC SDAJ40X60-75S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the M12x1.25 adjuster screw, you can dial the forward end-position from 0 up to 60 mm directly on the machine, saving axial mounting depth where a larger body cylinder will not fit. Retract remains full length, and the fixed NBR bumper decelerates the stroke end.

This specific build includes a built-in piston magnet (-S) for AirTAC reed or electronic solid-state switches, operating at speeds of 30-500 mm/s.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-75S Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-75S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke60 mm
Adjustable range0 – 60 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-75S

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×60Maximum stroke length in mm.
-75Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-75S Is Used

precision_manufacturing

Machining Clamps

Dial the extend stop from 0 to 60 mm to position workholding clamps precisely during short-run changeovers without fabricating new spacers.

science

Lab Test Actuators

Trial positioning for test probes is simplified by the M12x1.25 adjuster screw, letting operators find the exact contact depth safely.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-75S the Right Cylinder?

This model is ideal for setups requiring frequent on-site stroke tuning or trial positioning. Remember that a plain cylinder does not hold its load on air loss or when the valve is centered; the piston drifts and the bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve. Configuration confirmed: 40 mm bore, 60 mm stroke, 75 mm window, PT1/8 port, female M8x1.25 rod thread, and -S magnet.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–60 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-75S FAQ

The M12x1.25 screw shortens the extend stop by up to 75 mm, yielding a usable 0-60 mm forward range without changing the force. The included -S magnet works with AirTAC reed or electronic switches for end-position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-75S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X60-75S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.