
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X65-30 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X65-30 is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. An external M12x1.25 screw lets you dial the forward end-position anywhere between 35 and 65 mm without swapping shims or parts, making it ideal for fine-tuning during machine commissioning. Retract travel remains full length.
The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End shock is managed by a fixed NBR bumper rather than an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X65-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 65 mm |
| Adjustable range | 35 – 65 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 35 to 65 mm clamping reach during tooling changeovers to secure varied part sizes without manufacturing new spacers.
Choose this unit when your fixture requires on-site stroke tuning across a 30 mm window.
Confirm the PT1/8 port, 16 mm rod, female M8x1.25 thread, and the 65 mm maximum stroke. This specific SKU lacks the -S magnet, so it cannot accept reed or electronic switches; select the -S variant if sensing is required. Remember that a plain cylinder drifts on air loss—the fixed bumper only decelerates near the end and is not a lock, so add an external rod lock or pilot-operated check valve for load holding.
Quick checklist
Operating pressure is 0.15-1.0 MPa.
Turning the M12x1.25 R screw shortens the extend stroke by up to 30 mm, giving a usable 35 to 65 mm forward range. It acts purely as a mechanical stop and does not alter force. The cylinder cannot hold a load on air loss; use an external rod lock for holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.