verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X65-30S

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X65-30S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 65 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke65 mm
  • Adjustable range35–65 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$64.17 $71.67Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X65-30S

The AirTAC SDAJ40X65-30S is a double-acting compact cylinder featuring an on-site adjustable extend stop. An external M12x1.25 adjuster screw lets you dial the forward end-position anywhere between 35 and 65 mm, eliminating the need for shims or part swaps during machine commissioning.

The short riveted body drastically reduces axial mounting depth, fitting where round-body or profile cylinders cannot. End-of-stroke energy is managed by a fixed NBR bumper that decelerates the piston rather than acting as an adjustable air cushion. Equipped with a built-in piston magnet (-S), this unit supports AirTAC reed or electronic solid-state switches for precise position confirmation.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X65-30S Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X65-30S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke65 mm
Adjustable range35 – 65 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X65-30S

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×65Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X65-30S Is Used

precision_manufacturing

Machining Clamp Tuning

Dial the extend stop between 35 and 65 mm to perfect the clamping depth on raw castings of varying thickness without machining custom spacers.

science

Lab Dispense Positioning

Use the M12x1.25 adjuster screw for trial positioning of a dispense nozzle, ensuring the 40 mm bore delivers precise placement before locking the setting.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X65-30S the Right Cylinder?

Choose this specific model if your fixture requires frequent changeovers or trial positioning within the 35-65 mm range.

Confirm the 65 mm maximum stroke, 30 mm adjustment window, PT1/8 port, and the female M8x1.25 rod-end thread for your mounting interface. The included -S magnet enables switch sensing, but note that a plain cylinder does not hold a load on air loss or when the valve is centered; for vertical load holding without live pressure, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 35–65 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X65-30S FAQ

The external screw shortens the extend stroke by up to 30 mm (usable range 35-65 mm) without changing the force. The built-in -S magnet works with AirTAC reed or electronic switches for end-position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X65-30S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X65-30S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.