
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X65-30SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X65-30SB is a double-acting compact cylinder featuring an on-site adjustable extend stop. A built-in M12x1.25 adjuster screw lets you dial the forward stroke anywhere between 35 and 65 mm, eliminating the need for shims or part swaps during machine commissioning.
This variant includes a male M14x1.5 piston rod and a built-in magnet for position sensing. The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, and the body grooves accept AirTAC reed or electronic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X65-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 65 mm |
| Adjustable range | 35 – 65 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 35 to 65 mm via the M12x1.25 screw to accommodate different part heights on a machining line without swapping cylinders.
Lift payloads up to 32 kg safely, relying on the fixed NBR bumper to decelerate the load while setting exact upper positions between 35 and 65 mm.
When sizing this 40 mm bore, compare it directly with its neighbors.
Choose this specific configuration when your fixture requires precise 35-65 mm extend tuning on the factory floor. It features a PT1/8 port, a 16 mm rod, and the -S magnet for sensing. The -B option supplies a male M14x1.5 rod end. Remember that a plain cylinder drifts when air is lost or a valve centers; the fixed bumper only decelerates the stroke end and does not lock the load. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
The external M12x1.25 screw mechanically shortens the extend end-position by up to 30 mm, yielding a usable 35-65 mm stroke. This stop does not alter force or lock mid-stroke. The included -S magnet works with AirTAC reed or electronic solid-state switches mounted in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.