
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X65-40S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X65-40S is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjustment screw that dials the extend end-position anywhere between 25 and 65 mm directly on your machine.
The short riveted body drastically reduces axial mounting depth where a larger profile cylinder cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Equipped with a built-in piston magnet (-S), this unit supports AirTAC reed or electronic solid-state switches for precise position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X65-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 65 mm |
| Adjustable range | 25 – 65 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 25 to 65 mm via the M12x1.25 screw to accommodate varying part heights during production line changeovers without changing hardware.
Safely test end positions for new product fixtures, relying on the fixed NBR bumper to decelerate the stroke while operators find the exact 25-65 mm sweet spot.
Choose this specific adjustable model if your fixture setup involves frequent trial positioning or tooling changeovers that demand on-site stroke tuning without swapping shims.
Confirm your parameters: 40 mm bore, 65 mm max stroke, 40 mm adjust window, PT1/8 air port, built-in magnet (S), and female M8x1.25 rod-end thread. Remember that a plain cylinder does not hold position on air loss or when the valve is centered; the bumper only decelerates the stroke end. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
Operating pressure is 0.15-1.0 MPa, speed is 30-500 mm/s, and temperature ranges from -20 to +70 C.
Turning the external R (M12x1.25) screw shortens the extend stroke by up to 40 mm, yielding a usable 25-65 mm range. The -S suffix denotes a built-in piston magnet designed to trigger AirTAC reed or electronic solid-state switches in the body sensor grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.