
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X65-50B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 15 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X65-50B is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjustment screw that dials the extend stop from 15 to 65 mm directly on your machine.
This variant uses a male M14x1.5 piston rod thread and includes no piston magnet, meaning it cannot accept reed or electronic switches. The short riveted body saves axial mounting depth where larger profile cylinders will not fit, while a fixed NBR bumper decelerates the stroke end without acting as a lock.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X65-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 65 mm |
| Adjustable range | 15 – 65 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 15-65 mm extend stop during initial commissioning to perfect the gripper reach on a new lathe, avoiding custom spacers.
Test lift heights safely with a 32 kg payload, using the mechanical stop to set exact upper limits without mid-stroke locking.
Confirm your requirements for a 65 mm maximum stroke, 50 mm adjust window, PT1/8 port, and the male M14x1.5 rod end. Remember that a plain SDAJ does not hold position if air pressure drops or the valve centres; the piston will drift. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
Turning the M12x1.25 R screw shortens the extend stroke by up to 50 mm, allowing you to set the end position anywhere between 15 and 65 mm. It acts purely as a mechanical stop and does not alter the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.