
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X65-50S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 15 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X65-50S is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjustment screw that lets you dial the extend stop anywhere between 15 and 65 mm directly on the machine.
Its short riveted body saves valuable axial mounting depth where round-body or larger profile cylinders cannot fit, while the built-in piston magnet supports AirTAC reed or electronic switches for end-position sensing. End shock is managed by a fixed NBR bumper that decelerates the stroke, which is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X65-50S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 65 mm |
| Adjustable range | 15 – 65 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the pressing depth on carton sealing jaws on-site using the M12x1.25 screw, ensuring consistent flap closure while the fixed NBR bumper absorbs end shock.
Safely test vertical lift positions for 32 kg loads by adjusting the mechanical stop in increments, verifying alignment before finalizing the 65 mm extend cycle.
This model is specified with a 65 mm maximum stroke, a 50 mm adjustment window, a PT1/8 port, a female M8x1.25 rod-end thread, and the -S magnet option. If your application requires the load to remain held during air loss or valve centering, note that the bumper only decelerates near the end of travel and is not a lock; you will need an external rod lock or pilot-operated check valve for secure load holding.
Quick checklist
Turning the external R (M12x1.25) screw shortens the extend stroke by up to 50 mm, giving a usable range of 15 to 65 mm without shims. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.