
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-10 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 60 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X70-10 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A built-in M12x1.25 adjuster screw lets you dial the outward stroke down from the 70mm maximum to 60mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
Designed to save axial mounting depth where round-body or profile cylinders will not fit, this riveted-body unit operates between 0.15 and 1.0 MPa. End-of-travel energy is managed by a fixed NBR bumper that decelerates the piston rather than acting as an adjustable air cushion. Note that this specific SKU lacks a piston magnet and therefore cannot support position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 70 mm |
| Adjustable range | 60 – 70 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 60 and 70mm during machine setup to accommodate varying jig heights without machining new spacers.
Fine-tune the pusher stroke on the fly to handle different carton widths on a packaging line while maintaining 628.3 N of extend force.
When sizing this 40mm bore, evaluate your thrust requirements against its neighbours.
This cylinder suits operators who need on-site stroke tuning within a 60-70mm window. Confirm your setup requires a PT1/8 port, a 16mm rod with a female M8x1.25 end thread, and no magnet. Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa. It operates at speeds of 30-500 mm/s across a 0.15-1.0 MPa pressure range.
Turning the M12x1.25 adjuster screw shortens the extend stroke by up to 10mm, giving a usable range of 60-70mm without changing force. This specific SKU has no piston magnet, so it cannot take magnetic switches; you would need the -S variant to enable reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.