
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-10B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 60 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X70-10B is a double-acting compact cylinder featuring a male-thread piston rod and an external extend stop. An M12x1.25 adjuster screw lets you dial the outward stroke on the machine between 60 and 70 mm without swapping shims or parts.
Built with a short riveted body, this unit saves axial mounting depth where round-body or profile variants will not fit. It runs on a PT1/8 port and relies on a fixed NBR bumper to decelerate the stroke end. This SKU lacks a piston magnet, so it cannot accept reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 70 mm |
| Adjustable range | 60 – 70 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Uses the male M14x1.5 rod to push flaps into position, relying on the fixed NBR bumper to absorb end-of-stroke shock on varied box sizes.
Choose this model if your fixture requires precise 60-70 mm extend tuning during setup or changeover.
Confirm your parameters: 40 mm bore, 70 mm maximum stroke, 10 mm adjustment window, PT1/8 port, male M14x1.5 rod thread, and no magnet. Note that a plain cylinder does not hold a load if air pressure drops or the valve centers—the piston drifts. For suspended loads, install an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.5 MPa it pushes with 628.3 N and pulls with 527.8 N. At 0.7 MPa it pushes 879.6 N and pulls 738.9 N. The theoretical maximum push is 128 kgf at 1.0 MPa.
Turning the M12x1.25 screw shortens the extend end position from 70 mm down to 60 mm. It acts as a mechanical stop, not a mid-stroke lock, and the cylinder will drift if air is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.