
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-10S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 60 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X70-10S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M12x1.25) screw, you shorten the forward end position by up to 10 mm, dialling the usable stroke between 60 and 70 mm directly on your equipment without changing shims or parts.
Built with a short riveted body, this unit saves axial mounting depth where a round-body or profile cylinder will not fit. The 16 mm piston rod and PT1/8 port keep the footprint tight, while the built-in magnet (-S) supports AirTAC reed or electronic switches for position sensing. End shock is handled by a fixed NBR bumper that decelerates the stroke end; it is not an adjustable air cushion, nor does it lock the load.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 70 mm |
| Adjustable range | 60 – 70 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 60-70 mm insertion depth for bearings on a machining line, using the R screw to compensate for tool wear without swapping parts.
Choose this model if your fixture requires precise on-machine stroke tuning during setup or changeover. Confirm your parameters: 40 mm bore, 70 mm max stroke with a 10 mm window, PT1/8 port, female M8x1.25 rod thread, and the -S magnet for sensing. Remember that a plain cylinder drifts when air is lost or the valve is centred; the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The external M12x1.25 screw shortens the extend end position by up to 10 mm, giving a usable stroke of 60-70 mm. The included -S magnet works with AirTAC reed or electronic switches for position confirmation.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.