verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-20

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-20 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 50 to 70 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke70 mm
  • Adjustable range50–70 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$58.59 $66.09Save 11% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-20

The AirTAC SDAJ40X70-20 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M12x1.25) screw, you can dial the outward stroke down by up to 20 mm directly on the machine, yielding a usable extend range of 50-70 mm without swapping shims or parts.

This thin riveted-body design saves significant axial mounting depth where a larger profile cylinder will not fit. End-of-travel deceleration is handled by a fixed NBR bumper at each end, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-20 Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-20
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke70 mm
Adjustable range50 – 70 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-20

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×70Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-20 Is Used

precision_manufacturing

Machining Clamp Depth

Dial the extend stop from 50 to 70 mm to accommodate varying raw stock thicknesses on a milling fixture without machining new spacers.

packaging

Carton Flap Folding

Fine-tune the push rod end point on the fly during packaging line changeovers to perfectly fold different box heights.

straighten

Press Fit Positioning

Set a precise mechanical lower stop for pressing bearings, ensuring the 628.3 N extend force seats components without bottoming out.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-20 the Right Cylinder?

The SDAJ40X70-20 is ideal for setups requiring on-site stroke tuning during frequent changeovers.

Confirm your parameters before ordering: a 40 mm bore, 70 mm maximum stroke with a 20 mm adjust window, PT1/8 air port, and a female rod-end thread (M8x1.25). This SKU has no magnet. Remember that a plain cylinder does not hold position if air pressure drops or the valve centres; the piston will drift. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 50–70 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-20 FAQ

The external R (M12x1.25) screw mechanically limits the extend stroke, allowing you to set the outward travel anywhere between 50 and 70 mm. It acts as a hard stop and does not alter the output force or lock the piston mid-stroke.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X70-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.