
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-20B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 50 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X70-20B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M12x1.25 adjuster screw lets you dial the outward stroke down by up to 20 mm on the machine, yielding a usable extend range of 50 to 70 mm without swapping shims or parts. Retract remains full length.
This variant features a male M14x1.5 piston rod thread on a 16 mm rod. The short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit. End shock is handled by a fixed NBR bumper that decelerates the stroke end; it is not an adjustable air cushion. Note this SKU lacks a piston magnet and cannot take a magnetic switch.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 70 mm |
| Adjustable range | 50 – 70 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male M14x1.5 rod tooling on the fly during carton size changeovers, saving axial depth in tight packaging machine frames.
Set an exact material bend angle by tuning the extend stop, relying on the fixed NBR bumper to absorb the 879.6 N shock at 0.7 MPa.
Choose this specific model when your fixture requires on-site stroke tuning between 50 and 70 mm to perfect a pressing or clamping distance.
Confirm the bore, 70 mm max stroke, 20 mm window, and PT1/8 air port suit your manifold. This SKU includes the -B male M14x1.5 rod thread; ensure your mating clevis or tooling matches. A plain cylinder does not hold its load on air loss or when the valve is centred—the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
This 40 mm bore cylinder has a PT1/8 air port. Force is identical to a standard SDA: push is 628.3 N and pull is 527.8 N at 0.5 MPa. At 0.7 MPa, push is 879.6 N and pull is 738.9 N. The theoretical maximum push is 128 kgf at 1.0 MPa.
The external M12x1.25 screw mechanically shortens the extend stroke by up to 20 mm, giving an on-site range of 50 to 70 mm; it does not alter force. This specific SKU has no piston magnet, so it cannot take a magnetic switch. You would need the -S variant to use reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.