
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-30 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 40 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X70-30 is a compact double-acting double-rod cylinder built for applications requiring variable extend end-positions. An external M12x1.25 adjuster screw lets you dial the forward stop from 40 to 70 mm directly on the machine, eliminating the need for shims or part swaps.
The short riveted body design significantly reduces axial mounting depth, fitting into tight spaces where larger profile cylinders cannot. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 70 mm |
| Adjustable range | 40 – 70 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 40 to 70 mm via the M12x1.25 screw to accommodate different jig heights without machining new spacers.
Choose the 40 mm bore when your application demands moderate force within a tight footprint.
This model is perfect for operators needing on-site stroke tuning during setup or tooling changeovers. Remember that a plain double-acting cylinder does not hold position if air pressure drops or the valve is centered; the fixed bumper only decelerates the stroke end. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve. Confirm your requirements for a 40 mm bore, 70 mm max stroke, 30 mm window, PT1/8 port, female rod thread, and no magnet.
Quick checklist
Turning the external R (M12x1.25) screw mechanically shortens the extend stroke by up to 30 mm, allowing usable forward travel between 40 mm and 70 mm. It acts purely as a stop and does not alter the cylinder's force output.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.