
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-40 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X70-40 is a compact double-acting double-rod cylinder engineered for on-site extend positioning. An external M12x1.25 adjuster screw lets you dial the forward stop anywhere between 30 and 70 mm, eliminating the need for shims or part swaps during commissioning.
Housed within a short riveted body, this unit saves valuable axial mounting depth where larger profile cylinders cannot fit. It features a 16 mm piston rod, a PT1/8 air port, and fixed NBR bumpers that decelerate the stroke ends. Operating speeds span 30-500 mm/s across a 0.15-1.0 MPa pressure range, making it highly versatile for dynamic sequencing tasks.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 70 mm |
| Adjustable range | 30 – 70 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M12x1.25 screw to set exact 30-70 mm clamp depth on raw castings, accommodating varied part sizes without swapping out actuator bodies.
Stepping down, the SDAJ32 provides 402.1 N, whereas stepping up to the SDAJ50 yields 981.7 N. Choose this specific model if your fixture requires frequent trial positioning or changeovers within that 30-70 mm window.
Confirm your parameters require a 40 mm bore, 70 mm maximum stroke, 40 mm adjustment window, and PT1/8 porting. Note that this SKU lacks the S magnet, so it cannot support reed or electronic switches; specify the -S variant if sensing is required. Furthermore, a plain cylinder does not hold position on air loss or valve centering—the fixed bumper only decelerates near the end of travel. For suspended loads, integrate an external rod lock or pilot-operated check valve.
Quick checklist
Turning the external R (M12x1.25) screw mechanically shortens the extend end-position by up to 40 mm, allowing usable forward travel between 30 and 70 mm. It acts purely as a stop and does not alter the cylinder's force output.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.