
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-40S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X70-40S is a compact double-acting double-rod cylinder engineered for on-site stroke tuning. An external M12x1.25 adjuster screw lets you dial the extend stop anywhere between 30 and 70 mm, eliminating the need for shims or part swaps during machine commissioning.
The short riveted body minimizes axial mounting depth, fitting easily where standard profile or round-body cylinders cannot. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Equipped with a built-in piston magnet (-S), this unit supports AirTAC reed or electronic solid-state switches for precise position feedback.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 70 mm |
| Adjustable range | 30 – 70 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 30 to 70 mm via the M12x1.25 screw to accommodate varying fixture heights on machining centers without machining new spacers.
It is ideal for operators who require frequent on-site stroke adjustments to fine-tune positioning.
Remember that a plain compact cylinder does not hold its load if air pressure drops or the valve is centered; the piston will drift. The fixed NBR bumper only decelerates the stroke end and the M12x1.25 screw is a mechanical stop, neither acts as a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve. This configuration features a 70 mm maximum stroke with a 40 mm window, a PT1/8 port, a 16 mm rod, female M8x1.25 rod-end threads, and the -S magnet option.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa. The adjuster screw does not change these values.
The M12x1.25 screw shortens the extend stroke by up to 40 mm, allowing a usable range of 30 to 70 mm without changing parts. The built-in -S magnet enables position detection using AirTAC reed or electronic solid-state switches mounted in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.