
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-50 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X70-50 is a double-acting compact cylinder featuring an external M12x1.25 adjuster screw that dials the extend stop from 20 to 70 mm directly on your machine. The short riveted body drastically reduces axial mounting depth, fitting where round-body or profile cylinders cannot.
This 40 mm bore unit relies on a fixed NBR bumper at each end to decelerate the stroke, meaning it is not an adjustable air cushion or a mid-stroke lock. It operates between 0.15 and 1.0 MPa with a speed range of 30-500 mm/s. Note that this specific SKU lacks a piston magnet and therefore cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 70 mm |
| Adjustable range | 20 – 70 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 20-70 mm extend stop to accommodate raw material thickness variations on a milling fixture without manufacturing new spacer blocks.
Set precise lowering depths for a 32 kg vertical lift payload, relying on the mechanical stop rather than relying solely on pneumatic pressure.
Choose this model if your fixture requires frequent on-machine stroke tuning between 20 and 70 mm without swapping shims or components.
Confirm your required extend window, the PT1/8 port, and the female M8x1.25 rod-end thread. Because this SKU has no -S magnet, position sensing is unavailable unless you specify the magnet option. Remember that a plain cylinder does not hold its load on air loss or valve centering—the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The air port is PT1/8.
Turning the external M12x1.25 screw shortens the extend stroke by up to 50 mm, giving a usable range of 20 to 70 mm. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you must select the -S magnet option for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.