
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-75S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X70-75S is a double-acting compact cylinder featuring an external M12x1.25 R-thread adjuster screw that dials the extend stop down to anywhere between 0 and 70 mm directly on your machine.
Its short riveted body drastically cuts axial mounting depth where larger profile or round-body units cannot fit. This specific build includes a built-in piston magnet (-S) for AirTAC reed or electronic solid-state switches, while end-of-stroke deceleration is handled strictly by a fixed NBR bumper rather than an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X70-75S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 70 mm |
| Adjustable range | 0 – 70 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 0-70 mm extend stop during tool changeovers to secure parts of varying widths without swapping out the entire actuator.
Choose this model if your fixture requires frequent on-site extend tuning within the 0-70 mm window.
Keep in mind that a plain SDAJ40X70-75S does not hold position if air pressure drops or the valve centers; the piston will drift and the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve. Confirm your requirements for the PT1/8 port, 16 mm rod, female M8x1.25 rod thread, and the included -S magnet.
Quick checklist
Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
The M12x1.25 adjuster screw shortens the extend stroke by up to 75 mm, allowing usable extend positions from 0 to 70 mm. The -S option denotes a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.