Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-10S
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-10S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 65 to 75 mm on the machine — no shims, no part change.
- BoreØ40 mm
- Max stroke75 mm
- Adjustable range65–75 mm
- Adjuster threadM12×1.25
- Port sizePT1/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-10S
The AirTAC SDAJ40X75-10S is a double-acting compact cylinder featuring an external R (M12x1.25) adjustment screw that dials the extend stop from 65 to 75 mm directly on your machine. A built-in piston magnet enables position feedback.
Its short riveted body minimizes axial mounting depth where longer profile or round-body units will not fit. The unit relies on a fixed NBR bumper to decelerate the stroke end, meaning it is not an adjustable air cushion. Operating speed spans 30-500 mm/s, and the PT1/8 port matches the 40 mm bore specification.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-10S Technical Specifications
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 75 mm |
| Adjustable range | 65 – 75 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-10S
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-10S Is Used
Tooling Changeover
Dial in the 65-75 mm extend stop during die swaps to accommodate varying part thicknesses without fabricating new spacers.
Vertical Lift Stops
Set precise upper travel limits for 32 kg lifts, relying on the mechanical stop rather than pneumatic pressure alone.
Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-10S the Right Cylinder?
This specific configuration includes the -S magnet for AirTAC reed or electronic switches and a 10 mm adjustment window over a 75 mm stroke.
Operators who require frequent changeovers or trial positioning benefit from the on-machine tuning. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 65–75 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M12×1.25 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-10S FAQ
The theoretical maximum push is 128 kgf at 1.0 MPa.
Turning the M12x1.25 adjuster screw shortens the extend stroke by up to 10 mm, yielding a usable 65-75 mm range. The -S code denotes a built-in piston magnet designed to trigger AirTAC reed or electronic solid-state switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.