
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-10SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 65 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X75-10SB is a compact double-acting cylinder featuring an external M12x1.25 adjustment screw that lets you dial the extend stop precisely between 65 and 75 mm directly on the machine. This thin riveted-body design drastically reduces axial mounting depth, fitting into tight spaces where larger profile cylinders cannot.
This specific configuration includes a built-in piston magnet (-S) for compatibility with AirTAC reed or electronic switches, alongside a male M14x1.5 threaded rod end (-B) for secure mechanical attachments. End-of-travel deceleration is handled by a fixed NBR bumper at each end, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 75 mm |
| Adjustable range | 65 – 75 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 65-75 mm extend stop during setup to perfectly seat parts against a fixture, absorbing variability without remachining hard stops.
Set the exact extend endpoint for light bending tasks, leveraging the 32 kg vertical lift capacity to position tooling accurately before actuation.
Choose this model if your fixture requires frequent on-site stroke tuning to perfect an end position without swapping parts.
Confirm the 75 mm maximum stroke, 10 mm adjustment window, and PT1/8 air port match your pneumatic supply. The -S magnet enables position sensing, while the -B option provides a male M14x1.5 rod thread. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centers; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push force is 128 kgf at 1.0 MPa.
The M12x1.25 adjuster screw shortens the extend stroke by up to 10 mm, yielding a usable 65-75 mm range. The built-in -S magnet allows tracking by AirTAC reed or electronic switches, while the fixed NBR bumper handles end shock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.