Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-30S
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-30S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 45 to 75 mm on the machine — no shims, no part change.
- BoreØ40 mm
- Max stroke75 mm
- Adjustable range45–75 mm
- Adjuster threadM12×1.25
- Port sizePT1/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-30S
The AirTAC SDAJ40X75-30S is a compact double-acting double-rod cylinder engineered for on-site extend positioning. An external M12x1.25 adjuster screw dials the forward stop down by 30 mm, yielding a usable extend range of 45 to 75 mm without swapping shims or parts.
This 40 mm bore actuator features a short riveted body that minimizes axial mounting depth in tight machinery. The -S suffix denotes a built-in piston magnet compatible with AirTAC reed or electronic switches fitted into the body grooves. End-of-travel shock relies on a fixed NBR bumper, meaning it decelerates the stroke but is not an adjustable air cushion.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-30S Technical Specifications
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 75 mm |
| Adjustable range | 45 – 75 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-30S
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-30S Is Used
Machining Clamps
Dial in the 45 to 75 mm extend stop during tooling changeovers to secure parts of varying widths without fabricating new spacers.
Lab Automation Jigs
Use the built-in magnet with an electronic switch to verify the adjusted extend position for delicate trial-and-error probe placements.
Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-30S the Right Cylinder?
Choose this specific model if your fixture requires frequent changeovers or trial positioning within the 45 to 75 mm window.
Confirm the 75 mm maximum stroke, 30 mm adjustment window, PT1/8 port, and the included magnet. The 16 mm rod uses a female M8x1.25 end thread. Remember that a plain cylinder does not hold position if air pressure drops or the valve centers; the bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 45–75 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M12×1.25 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-30S FAQ
Turning the external M12x1.25 screw shortens the extend stop anywhere between 45 and 75 mm. The integrated -S magnet works with AirTAC reed or electronic switches for position sensing, while the fixed NBR bumper decelerates the stroke end.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.