
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-30SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 45 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X75-30SB is a compact double-acting cylinder featuring an external R (M12x1.25) adjustment screw that dials the extend stop from 45 to 75 mm directly on your machine. The short riveted body drastically reduces axial mounting depth, fitting where larger profile or round-body cylinders cannot.
This specific configuration includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and a male M14x1.5 threaded rod end (-B) for secure external mounting. End shock is managed by a fixed NBR bumper that decelerates the piston near the stroke limits; it is not an adjustable air cushion. Operating speed ranges from 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 75 mm |
| Adjustable range | 45 – 75 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 45 and 75 mm via the M12x1.25 screw to set new datum points during fixture swaps without machining new spacers.
Safely lift approximately 32 kg by adjusting the male-thread rod extension to prevent over-travel in tight vertical lifting stations.
Confirm your requirements for a 75 mm maximum stroke, 30 mm adjust window, PT1/8 port, male M14x1.5 rod, and integrated magnet.
Remember that a plain compact cylinder does not hold position if air pressure drops or the valve is centered—the piston will drift. The external R screw is a mechanical stop, not a mid-stroke lock. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
At 0.7 MPa, push increases to 879.6 N and pull to 738.9 N. The theoretical maximum push force is 128 kgf at 1.0 MPa.
Turning the external R (M12x1.25) screw shortens the extend end position anywhere from the full 75 mm down to 45 mm, with no part changes required. The built-in -S magnet allows you to track position using AirTAC reed or electronic solid-state switches mounted in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.