
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-50S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X75-50S is a compact double-acting double-rod cylinder featuring an external extend stop. An M12x1.25 adjuster screw lets you dial the forward end-position anywhere between 25 and 75 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
The short riveted body drastically reduces axial mounting depth, fitting where round-body or profile cylinders cannot. This unit includes a built-in piston magnet for AirTAC reed or electronic switches, while a fixed NBR bumper decelerates the stroke ends. It is a pneumatic actuator, not a mid-stroke lock, so external hardware is required for load holding.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-50S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 75 mm |
| Adjustable range | 25 – 75 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 25-75 mm extend stop during tooling changeovers to accommodate varying part widths without fabricating new spacer blocks.
Set precise upper travel limits for a 32 kg lift payload, relying on the fixed NBR bumper to absorb the end-of-stroke shock safely.
When sizing this 40 mm bore actuator, evaluate both adjacent options.
Choose this specific model if your fixture requires frequent on-site stroke tuning across a 50 mm window. It features a PT1/8 port, a 16 mm rod, and a female M8x1.25 rod-end thread. The included -S magnet enables position sensing. Remember that a plain cylinder drifts when air is lost or the valve is centered; integrate an external rod lock or pilot-operated check valve if your application demands strict load holding.
Quick checklist
The M12x1.25 R screw shortens the extend stroke by up to 50 mm, yielding a usable 25-75 mm forward range. The included -S magnet works with AirTAC reed or electronic solid-state switches for position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.