
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-50SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X75-50SB is a compact double-acting double-rod cylinder built for exact on-machine extend positioning. An external M12x1.25 adjuster screw lets you dial the forward stop anywhere between 25 and 75 mm without changing parts.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M14x1.5 piston rod thread. The short riveted body saves axial mounting depth where larger profile cylinders cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-50SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 75 mm |
| Adjustable range | 25 – 75 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Tune the stroke on-site to deflect varying package sizes on a packaging line, relying on the fixed NBR bumper to absorb the 30-500 mm/s travel shock.
Choose this unit when fixtures require frequent changeover and the extend endpoint must be tuned on the fly.
Confirm the 75 mm maximum stroke, 50 mm adjust window, PT1/8 port, and the -S magnet for switch readiness. The -B option supplies a male M14x1.5 rod end. Note that a plain cylinder drifts when air is lost or the valve centres; the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. Use an external rod lock or pilot-operated check valve for load holding.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
The M12x1.25 R screw shortens the extend stroke by up to 50 mm, giving a usable 25-75 mm forward range while retract remains full. The -S code means a built-in magnet is installed for position sensing with AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.