Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-75S
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-75S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 75 mm on the machine — no shims, no part change.
- BoreØ40 mm
- Max stroke75 mm
- Adjustable range0–75 mm
- Adjuster threadM12×1.25
- Port sizePT1/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-75S
The AirTAC SDAJ40X75-75S is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjustment screw that dials the extend stop from 0 to 75 mm directly on your machine.
Its short riveted body drastically reduces axial mounting depth compared to round-body alternatives, fitting into tight machine envelopes.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-75S Technical Specifications
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-75S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 75 mm |
| Adjustable range | 0 – 75 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-75S
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-75S Is Used
Changeover-Heavy Machining
Dial the extend stop from 0 to 75 mm during rapid tooling changeovers to accommodate varying part heights without fabricating new spacers.
Trial Positioning Rigs
Prototyping stations benefit from the M12x1.25 fine-pitch adjuster, allowing engineers to find the exact 32 kg vertical lift point before locking the collar.
Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-75S the Right Cylinder?
Choose this specific model when your fixture requires on-site stroke tuning across a wide 0 to 75 mm window without changing parts. Confirm the PT1/8 port, the 16 mm rod with female M8x1.25 threading, and the presence of the S magnet for reed or electronic switches.
Remember that a plain compact cylinder does not hold a load if air pressure drops or the valve centers; the piston will drift. The fixed bumper only decelerates motion near the end of travel and the R screw acts as a mechanical stop, neither functioning as a brake. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve into your circuit.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 0–75 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M12×1.25 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-75S FAQ
Turning the external R screw shortens the extend stroke anywhere between 0 and 75 mm without altering force. The included S magnet works with AirTAC reed or electronic switches for position feedback, while a fixed NBR bumper decelerates the end of travel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.