
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-75SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X75-75SB is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M12x1.25) screw, you can dial the extend position from 0 to 75 mm directly on the machine, eliminating the need for shims or part swaps. The retract stroke remains full length, while the extend end is mechanically bounded by the adjuster.
The short riveted body saves axial mounting depth where round-body or profile cylinders cannot fit. Equipped with a built-in magnet (-S) for AirTAC reed or electronic switches and a male-thread piston rod (-B, M14x1.5), it uses a fixed NBR bumper to decelerate the stroke end rather than an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X75-75SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 75 mm |
| Adjustable range | 0 – 75 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 75 mm via the M12x1.25 screw to accommodate varying fixture heights during product changeovers without machining new spacers.
Use the built-in magnet with an electronic switch to verify the 0-75 mm extend position during prototype runs, safely testing alignment before locking down the final stop.
Choose this 40 mm option when you need moderate force combined with extensive on-site stroke tuning.
Confirm the 40 mm bore, 75 mm maximum stroke, and 75 mm adjustment window suit your spatial limits, noting the PT1/8 air port. The -S code ensures compatibility with AirTAC reed or solid-state sensors, while the -B option provides a male M14x1.5 rod end. Remember that a plain cylinder does not hold its load on air loss or valve centring; the piston drifts and the fixed bumper only decelerates near the end. For a held load, install an external rod lock or a pilot-operated check valve.
Quick checklist
The adjustment screw does not alter these force values.
Turning the external R (M12x1.25) screw shortens the extend stroke by up to 75 mm, allowing usable extend positions between 0 and 75 mm. The -S code denotes a built-in piston magnet for AirTAC reed or electronic switches, enabling end-of-stroke detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.