
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-10SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 70 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X80-10SB is a compact double-acting cylinder featuring an external M12x1.25 adjustment screw that lets you dial the extend stop precisely between 70 and 80 mm directly on the machine. The short riveted body saves valuable axial mounting depth where round-body or profile cylinders simply will not fit.
This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches, along with a male M14x1.5 threaded rod end for secure external mounting. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed ranges from 30 to 500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 80 mm |
| Adjustable range | 70 – 80 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 70-80 mm extend stop to perfectly seat gripper jaws on varying part sizes without re-engineering the entire tool head.
Use the male M14x1.5 rod end to secure tooling and set the exact extend depth for pressing pins without bottoming out the assembly.
Choose this 40 mm bore when your application demands moderate force within a tight footprint.
This model is ideal for setups requiring frequent on-site stroke tuning during changeovers. It includes the -S magnet for position sensing and the -B male M14x1.5 rod thread. Remember that a plain cylinder does not hold its load if air pressure is lost or the valve is centered; the piston will drift. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The M12x1.25 adjuster screw shortens the extend stroke by up to 10 mm (usable range 70-80 mm) without changing the force. The built-in magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.