
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-20 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 60 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X80-20 is a double-acting compact cylinder featuring an external M12x1.25 adjustment screw that dials the extend stop from 60 to 80 mm directly on your machine. The short riveted body drastically reduces axial mounting depth where a larger profile cylinder simply will not fit.
End-of-travel energy is managed solely by a fixed NBR bumper that decelerates the piston near the stroke terminus; it is not an adjustable air cushion. This specific SKU ships without a piston magnet, so it cannot accept reed or electronic switches. Operating pressure spans 0.15 to 1.0 MPa, and the unit runs at speeds between 30 and 500 mm/s.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 80 mm |
| Adjustable range | 60 – 80 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 60-80 mm extend stop during CNC changeovers to clamp raw castings securely without swapping out physical spacer shims on the fixture.
Adjust the mechanical extend position on the packaging line to accommodate varying box heights on the fly, relying on the fixed NBR bumper to absorb the end shock.
Confirm the 40 mm bore, 80 mm stroke, 20 mm adjust window, and PT1/8 port match your pneumatic layout. This base model lacks the -S magnet option, precluding position sensing, and uses a female M8x1.25 rod-end thread. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centres; for vertical load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
Turning the external M12x1.25 R screw shortens the extend stop by up to 20 mm, allowing you to set the extend distance anywhere between 60 and 80 mm. The screw acts only as a mechanical end stop; it does not lock the piston mid-stroke, and the cylinder cannot hold a load if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.