
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-20SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 60 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X80-20SB is a double-acting compact cylinder featuring an external M12x1.25 adjustment screw that lets you dial the extend stop anywhere between 60 and 80 mm directly on the machine. The short riveted body drastically saves axial mounting depth where a longer profile cylinder will not fit.
This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches, along with a male M14x1.5 threaded rod end for secure external mounting. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed ranges from 30 to 500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 80 mm |
| Adjustable range | 60 – 80 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 60-80 mm extend stop during machine setup to accommodate different part heights without fabricating new spacers.
Adjust the male M14x1.5 rod end contact point on the fly for varying carton depths while maintaining 628.3 N of extend force.
Use the external screw to find the exact 32 kg vertical lift threshold before locking the assembly down permanently.
Confirm your requirements for the 80 mm maximum stroke, 20 mm window, PT1/8 port, built-in magnet (S), and male rod thread (B).
Remember that a plain cylinder does not hold its load if air pressure drops or the valve is centred; the piston will drift. The fixed NBR bumper only decelerates the stroke near the end and the M12x1.25 screw is a mechanical stop, neither component acts as a lock. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
The M12x1.25 screw shortens the extend stroke by up to 20 mm, giving a usable 60-80 mm range. The included -S magnet works with AirTAC reed or electronic solid-state switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.