
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-40SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 40 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X80-40SB is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjustment screw. Turning this R thread lets you dial the extend end-position anywhere between 40 and 80 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract travel remains full length.
This variant includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and a male M14x1.5 piston rod thread (-B) instead of the default female M8x1.25. The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. End shock is handled by a fixed NBR bumper that decelerates the stroke; it is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-40SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 80 mm |
| Adjustable range | 40 – 80 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male-thread rod end on the fly for different box sizes during line changeover, relying on the fixed NBR bumper to absorb the 30-500 mm/s approach impact.
Set precise upper travel limits for a 32 kg vertical lift payload, tweaking the M12x1.25 screw during commissioning to prevent overshoot in tight vertical spaces.
Choose this specific model if your fixture setup requires frequent trial positioning or on-site stroke tuning across the 40 to 80 mm window.
Confirm your parameters: 40 mm bore, 80 mm max stroke, 40 mm adjust window, PT1/8 port, -S magnet for sensing, and -B male rod thread. Remember that a plain cylinder does not hold its load on air loss or valve centring—the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
This 40 mm bore cylinder uses a PT1/8 air port.
The external M12x1.25 screw shortens the extend stop by up to 40 mm, giving a usable 40-80 mm range without changing force. The included -S magnet works with AirTAC reed or electronic solid-state switches mounted in the body grooves for end-position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.