
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-50SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X80-50SB is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A built-in piston magnet and male-thread piston rod come standard on this unit. The short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit, accepting standard AirTAC compact-cylinder accessories.
Turning the R (M12x1.25) adjuster screw shortens the extend end on-site within the window, giving a usable extend range of 30-80 mm while retract remains full. A fixed NBR bumper at each end decelerates the stroke end but is not an adjustable air cushion or a lock.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-50SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 80 mm |
| Adjustable range | 30 – 80 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the diverter stroke on the machine for different carton widths, using the fixed NBR bumper to decelerate the 16 mm rod end reliably at high cycle rates.
Choose this exact model when you need on-site stroke tuning to dial in trial positioning during setup-heavy changeovers.
Confirm the bore, 80 mm maximum stroke, 50 mm window, PT1/8 air port, -S magnet for reed or electronic switches, and the -B male M14x1.5 piston rod. A plain cylinder does not hold its load on air loss or valve centred; the piston drifts and the bumper only decelerates near the stroke end. For a held load without live pressure, specify an external rod lock or a pilot-operated check valve.
Quick checklist
The R (M12x1.25) screw shortens the extend stop by up to 50 mm, giving a usable extend of 30-80 mm without changing the force. The -S code indicates a built-in piston magnet for AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.