verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-75S

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-75S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 80 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke80 mm
  • Adjustable range5–80 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$71.61 $79.11Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-75S

The AirTAC SDAJ40X80-75S is a compact double-acting double-rod cylinder featuring an external extend stop. An M12x1.25 adjuster screw lets you dial the outward stroke anywhere from 5 to 80 mm directly on your equipment, eliminating the need for shims or part swaps during changeovers.

Built with a short riveted body, this unit saves valuable axial mounting depth where larger profile cylinders cannot fit. It relies on a fixed NBR bumper at each end to decelerate the stroke, meaning it is not an adjustable air cushion. The included -S piston magnet supports AirTAC reed or electronic solid-state switches for precise end-position detection.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-75S Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-75S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke80 mm
Adjustable range5 – 80 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-75S

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×80Maximum stroke length in mm.
-75Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-75S Is Used

precision_manufacturing

Machining Clamp Adjustment

Dial the extend stop from 5 to 80 mm to accommodate raw material thickness variations on a milling fixture without machining new spacers.

science

Lab Test Actuation

Set precise trial engagement depths for repetitive material testing, using the magnetic switches to trigger data capture at the adjusted stop.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-75S the Right Cylinder?

Opt for this specific model if your fixture requires frequent trial positioning or on-site stroke tuning across its 5-80 mm window. Confirm your setup needs a PT1/8 port, a 16 mm rod with a female M8x1.25 end thread, and the built-in magnet. Note that a plain cylinder drifts when air is lost or a valve centers; the fixed bumper only decelerates near the end and the adjuster is a mechanical stop, not a lock. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 5–80 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-75S FAQ

The theoretical maximum push is 128 kgf at 1.0 MPa.

Turning the M12x1.25 R screw shortens the extend stroke by up to 75 mm, yielding a usable 5 to 80 mm range. The built-in -S magnet allows tracking by AirTAC reed or electronic switches. The screw sets the mechanical stop and does not alter force.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-75S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X80-75S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.