
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X85-100S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X85-100S is a double-acting compact cylinder featuring an external M12x1.25 R screw that lets you dial the extend stop from 0 to 85 mm directly on the machine. The short riveted body drastically cuts axial mounting depth where a larger profile cylinder cannot fit.
This unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic solid-state switches along the body grooves. End-of-stroke deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed ranges from 30-500 mm/s, making it highly versatile for dynamic sequencing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X85-100S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 85 mm |
| Adjustable range | 0 – 85 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 100 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -100 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 0-85 mm extend stop for varying material thicknesses during press changeovers without swapping cylinders.
Fine-tune the actuation reach on the fly to accommodate different package widths moving down the line.
This model is ideal for setups requiring frequent on-site stroke tuning without part changes. Confirm your required extend window falls within 0-85 mm. The -S suffix means a magnet is included for position sensing, while the rod end features a standard female M8x1.25 thread (male M14x1.5 optional). Remember that a plain cylinder does not hold position upon air loss; integrate an external rod lock or pilot-operated check valve if load holding is critical.
Quick checklist
The M12x1.25 adjuster screw shortens the extend stop by up to 100 mm, yielding a usable extend range of 0-85 mm. The included -S magnet works with AirTAC reed or electronic switches for position sensing, while the fixed NBR bumper handles end-of-stroke shock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.