
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X85-20SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 65 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X85-20SB is a compact double-acting double-rod cylinder engineered for on-site extend positioning. An external M12x1.25 adjuster screw lets you dial the forward stop anywhere between 65 and 85 mm without swapping shims or parts, while the retract stroke remains full length.
Built with a short riveted body, this unit saves axial mounting depth where round-body or profile variants will not fit. It carries a built-in piston magnet for AirTAC reed or electronic switches, plus a male M14x1.5 threaded rod end. End shock is handled by a fixed NBR bumper that decelerates the stroke, which is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X85-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 85 mm |
| Adjustable range | 65 – 85 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the extend endpoint on the line during size changeovers, letting the male M14x1.5 rod push flaps accurately before taping at cycle speeds up to 500 mm/s.
Fine-tune the insertion depth of pins or bearings on prototype assemblies, relying on the fixed NBR bumper to absorb the end shock of each press.
Choose it when your fixture requires frequent changeovers or trial positioning within the 65-85 mm extend window. Confirm the PT1/8 port, the 20 mm adjustment range, the -S magnet, and the male M14x1.5 rod thread. Note that a plain cylinder drifts when air is lost or a valve centers; the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The built-in -S magnet allows tracking via AirTAC reed or electronic switches, while the retract stroke remains full length.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.